OCZ Technology | Products | Memory | OCZ DDR2 PC2-9200 Flex II 4GB Series

OCZ / Products / Memory / OCZ DDR2 PC2-9200 Flex II 4GB Series
OCZ DDR2 PC2-9200 Flex II 4GB Series



	1150MHz DDR2
	CL 5-5-5-18
	Available in 4GB (2x2048) Dual Channel Kits
	Unbuffered
	OCZ Lifetime Warranty
	2.1 Volts
	240 Pin DIMM
	2 x 1/8" ID (inner diameter) barbs Special Features
	Flex II XLC Heatsink*
	2.15 EVP Package Contents:**
	Flex II Memory Kit
	3/8" and 1/2" Barb Adaptors
	4-Way Manifold Barb
	40" Plastic Tube
	Manual Part Numbers 4GB (2x2048) D/C Kit PN - OCZ2FXT11504GK Guides
	Tuning Guide
	Tuning on X38 and X48 Important Note: Due to the width of the heatsink, Flex II memory kits cannot be installed on motherboards that require the modules to be inserted in sockets side by side. A maximum of one Flex II dual channel kit will fit on any motherboard with dual sockets.



OCZ DDR2 PC2-9200 / 1150 MHz / Flex II XLC / 4GB Dual Channel The Flex II memory series is designed for blazing speeds demanded by enthusiasts. These premium modules run at incredibly fast DDR2-1150 speeds for high-performance systems with integrated water-cooling. Designed to the very core to offer enthusiasts the thermal management innovation of hybrid water and passive cooling, the new PC2-9200 Flex II Series offers rock-solid stability and performance for your high-end gaming or overclocking system. The OCZ Flex II heat management solution enables high-frequency memory to operate within an optimal balance of extreme speeds and low latencies without the high temperatures that inhibit or damage the module. Each PC2-9200 Flex II memory module features this breakthrough thermal management technology from OCZ. Combining an effective new heatspreader design with integrated liquid injection system and dedicated channels directly over the module's ICs, Flex II effectively dissipates heat produced by high-speed memory. This sophisticated series was engineered with a unique "flexible" design to give enthusiasts the option to run the modules passively or water cooled via the thick array of aluminum fins, and the concurrent use of both options promotes maximum heat dissipation. The PC2-9200 Flex II modules are optimized for the latest cutting edge platforms and will be available in high-capacity 4GB (2x2048MB) dual channel kits. In its continued effort to make overclocking a user-friendly pastime, OCZ includes all the necessary accessories right in the box to setup your unique water-cooling system immediately after purchase, without the inconvenience of searching for additional hardware. * The new OCZ Flex II XLC (Xtreme Liquid Convention) heatsink delivers superior heat dissipation via the integrated pure aluminum heatsink and dedicated double liquid cooling channels directly over the module's ICs. The Flex II module was engineered with this unique "flexible" design to give enthusiasts the unparalleled option to run the modules passively or water cooled. The concurrent use of both technologies promotes maximum heat dissipation and pushes thermal management of memory modules one step further to keep up with the ever-increasing frequency demands. Flex II modules seamlessly co-migrate with any system upgrade to liquid cooling. **OCZ EVP (Extended Voltage Protection) is a feature that allows performance enthusiasts to use a VDIMM of 2.15V without invalidating their OCZ Lifetime Warranty.

Legion Hardware
"First off the OCZ DDR2 PC2-9200 Flex II 4GB Series is certainly the most impressive memory we have ever seen and as far as memory goes this kit has it all. The fact that we were able to hit 1246MHz (96MHz above spec) using nothing more than the air circulating the case, is impressive. Then when using the water-cooling feature we managed 1266MHz, which was even more impressive. While water-cooling did slightly improve the overclock, it will also help maximize stability during the warmer months of summer.These modules are certainly going to appeal to every kind of enthusiast, whether you are an overclocker, case modder or gamer, we imagine the Flex II memory modules are probably at the top of your wish list. Overall we have enjoyed playing with the new Flex II memory and for once this is a high-end product that we could easily justify spending our own hard earned cash on!"

TweakTown
"OCZ is by far one of the biggest supporters of overclockers out there. Overclocking of OCZ memory is always fun; managing to get high speeds is usually not a problem. We managed to hit the rated 1150MHz with the 2.1v standard, but pushing the memory to 2.25v in the GIGABYTE X38-DQ6 allowed us to increase our overclock to 1196MHz with an FSB of 299MHz. DDR2 hasn’t died, and one thing is for sure, companies like OCZ will really push the limits of DDR2 technology as long as it’s with us. Those who want a much more silent system can look to OCZ who has come to the party with a very impressive memory kit here. The Flex-II series should improve on the Flex design with dual paths for the water rather than a single, allowing for a more total cooling solution while still keeping the noise within the system to a minimum, thanks to the use of liquids. The added flexibility of still allowing air cooling users to have the advantages of this memory is nice as well."

Anandtech
"In the end, users purchasing this memory will typically be those looking for any performance advantage and this memory delivers on OCZ’s promise of the highest performing 2x2GB DDR2 memory kit available. While the ability to reach and maintain a stable DDR2-1200 setting was impressive to us, the more impressive aspect of this memory is its ability to run at 4-4-3-10 timings on 1.80V at DDR2-800 or 5-5-4-12 at DDR2-1066 on 1.95V. Really, the greatest strength of this memory is offering a multitude of timings and reasonable voltages up to its DDR2-1200 ceiling in a 4GB package. Pardon the pun, but this memory really is flexible."

normal version

http://www.ocztechnology.com/products/memory/ocz_ddr2_pc2_9200_flex_ii_4gb_series