OCZ Technology | Products | Memory | OCZ EL DDR PC-3700 *EOL

High Speed DDR Memory

High Speed DDR2 Memory

High Speed DDR3 Memory

Laptop Memory

Flash Media

Power Management

Cooling Products

OCZ Peripherals

DIY Notebooks

OCZ LAN Gear

End of Life

Find a reseller in your region.

OCZ / Products / Memory / OCZ EL DDR PC-3700 *EOL
OCZ EL DDR PC-3700 *EOL



	ULN Technology: (U)ltra (L)ow (N)oise shielded PCB
	Lifetime Warranty
	256MB or 512MB Modules
	CL 2.5-4-4-7 2T
	233 (466) MHz*
	2.8 volts
	184 Pin Dimm
	Unbuffered

	256MB PN- OCZ466256EL
	512MB PN- OCZ466512EL



OCZ EL DDR PC-3700 / 466mhz / Enhanced Latency Series OCZ EL DDR PC-3700 memory modules are designed for enhanced low latency operation by using state-of-the-art (U)ltra (L)ow (N)oise technology and at 466MHz are capable of reaching latencies of CL 2.5-4-4-7 or even lower depending on the specific motherboard! Please see our Motherboard Qualification Guide for specific information. Finally, OCZ EL DDR PC-3700 memory modules come with a copper heat spreader and are rated to handle up to 2.8V without invalidating the OCZ Lifetime Warranty so that performance enthusiasts can tweak their systems without worry! * This is an end of life product and is no longer available. If you need support for this product, please e-mail support@ocztechnology.com * Based on single module load at 2.8 volts +/- 5% DIMM Voltage. Some newer chipsets/motherboards may allow other timings (Some KT400 based boards allow up to CL2 484 2T timings at 466Mhz some 845e boards allow up to CL2 373 466Mhz). Due to chipset and motherboard diferences on a non-JEDEC standard product make sure to check our motherboard qualification page for the exact information for your motherboard.

Mikhailtech
Although I haven't had any previous experience with OCZ products, this first contact impressed me very much. Their EL DDR series seems to be quite successful and from what I've seen so far, they have the best specifications from all the memory modules on the market. I haven't tested the other products to have a more informed opinion, but the PC3700 EL DDR is hard to surpass in both performance and overclocking

X-bit Labs
These modules also did well at 400MHz with 2-3-3-5 timings. Their specs say they can work at 434MHz with CAS Latency = 2. And these 434MHz are exactly what we got overclocking these modules at 2.6V voltage and with 2-3-3-7 timings. By the way, OCZ uses copper heatsinks on its modules and permits setting up to 2.8V voltage on memory chips. Of course, the overclocking results would be even higher in this case.

HardAvenue
This enhanced latency series really has the edge because the aggressive timings along with the clock speed of 466Mhz puts OCZ basically right at the top of the list for RAM manufactures. Simply put, this RAM is built for overclocking.

printable version

send to a colleague